My CART

Commercial Restroom Mirror, Channel Frame Mirror

$48.15

Availability : In Stock

Product Type : Washroom Accessories

Vendor : Washroom Accessories

SKU : HDM-ASI-M0620

PRODUCT OVERVIEWChannel Frame Mirrors have a one piece, roll-formed, 20 gauge, type 304 satin finish stainless steel channel frame with tightly mitered corners. Select float glass mirror shall be guaranteed for 15 years against silver spoilage. 1/2" x 1/2" x 1/2" (13 x 13 x 13 mm) 20 gauge type...


PRODUCT OVERVIEW

Channel Frame Mirrors have a one piece, roll-formed, 20 gauge, type 304 satin finish stainless steel channel frame with tightly mitered corners. Select float glass mirror shall be guaranteed for 15 years against silver spoilage. 1/2" x 1/2" x 1/2" (13 x 13 x 13 mm) 20 gauge type 304 satin finish stainless steel channel is a one piece roll formed member that encases mirror and backing revealing a tight mitered corner. Mirror is installed on two wall brackets and held secure by theft resistant screw.
  • Mirror silver guaranteed for 15 years.
  • Type 304 stainless steel angle and channel frame construction.
  • Variety of reflective surfaces and wall mountings.
  • Mirrors for every location, application and budget - virtually any size available
  • Many with shelves and tilting features Options
  • Glazing Options Available

    All Mirrors are subject to additional shipping charges. This is a quote by quote basis.

    COMPONENTS AND MATERIALS

  • Frame: 18-8, type 304, 20 gauge (.036" <.91mm> thick) stainless steel. Roll-formed one piece construction. Exposed surfaces have a No 4 satin finish. Edges and corners are burr free.
  • Glass: Standard glazing is No 1 quality, 1/4" (6.4mm) thick plate/float, silver coated and hermetically sealed with a uniform copper plating, and warranted against silver spoilage for 15 years. Mirrors meet Federal Spec DD-M-411C, ASTM C- 1503, and ASTM C-1036-91.
  • Filler: Expanded polyethylene microcell foam sheet material, abrasion resistant and shock absorbing, water resistant, 1/8 inch (3.2mm) total layer thickness.
    Installation
    Install “H” wall brackets level and plumb per diagram location using ONLY No 8 or No 10 Pan Head screws (by others). Hang mirror on brackets and tighten locking screw (No 6-32F x 3/4" Philips Pan Head, supplied separately taped to mirror back) at bottom (note: this screw should be started prior to hanging mirror on wall bracket). For compliance with ADA Accessibility Guidelines, bottom edge of reflecting surface should be no higher than 40"(1016mm) above finished floor.

    SPECIFICATIONS

    Channel Frame Mirrors shall have frame fabricated of alloy 18-8 stainless steel, type 304, 20 gauge with mitered corners. Mirror glazing shall be warranted for 15 years against silver spoilage. All edges of mirror shall be protected by friction and chafe absorbing fillers. Back of mirror shall be protected by full size shock-absorbing water-resistant filler and full size one piece 20 gauge corrosion protected steel. Top and bottom wall mounting brackets shall be fabricated of 20 gauge corrosion protected steel and shall be spot welded into “H” hanger. Mirror shall be secured to lower bracket with a Phil- lips Pan Head locking screw.
  • Recently Viewed Products

    Sale

    Unavailable

    Sold Out