My CART

Xlerator XL-C Eco Chrome Hand Dryers - 3 Pieces

$1,710.00

Availability : In Stock

Product Type : Excel Hand Dryers

Vendor : Excel Hand Dryers

SKU : XL-C-ECO-3

PRODUCT OVERVIEWXLERATOReco XL-C-ECO uses No Heat technology to dry hands fast while using only 500 watts of energy, making it the most energy-efficient and environmentally-friendly hand dryer on the planet. 95% Cost Savings vs. Paper Towels 12 Second Dry Time 500 Watts No Heat Technology Adjustable Speed And Sound Control...


PRODUCT OVERVIEW



XLERATOReco XL-C-ECO uses No Heat technology to dry hands fast while using only 500 watts of energy, making it the most energy-efficient and environmentally-friendly hand dryer on the planet.
  • 95% Cost Savings vs. Paper Towels
  • 12 Second Dry Time
  • 500 Watts
  • No Heat Technology
  • Adjustable Speed And Sound Control
  • Multi Volt 110-120V, 208-277V, 230V
  • External Visible Service LED
  • Can Install Multiple XLERATOReco Units XL-C-ECO On One Circuit
  • 5-Year Limited Warranty
  • Made In USA Certified
  • GREENSPEC Listed and Helps Qualify for several LEED credits

    Hand Dryer Placement
  • Dryers should be placed at least 2 feet apart and at least 12" from washbasin.
  • Do not install dryer over washbasin.
  • Automatic dryers should be at least 18" above any projection which may interfere with the operation of the automatic sensor.
  • Average traffic washroom..............1 dryer per 2 washbasins
  • Heavy traffic washroom..................1 dryer per washbasin
  • 54" wash fountain...........................4 dryers per sink

    Mounting Heights(From floor to bottom of hand dryer):
  • Men 44"
  • Women 42"
  • Children 32-42"
  • Handicapped 36"

    Xlerator XL-C-ECO-3 Hand Dryer Chrome Cover

    COMPONENTS AND MATERIALS

    Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.


    Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring. All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded.

  • Recently Viewed Products

    Sale

    Unavailable

    Sold Out