White ABS thermoplastic one-piece cover, 1/8" (3 mm) thick.
Cover fixed to the base by means of 4 Phillips head screws
Engineering thermoplastic PP base, with 4 x 5/64" (8 mm) holes for wall mounting
Motor, induction, 3,300 rpm (at 60 Hz), maintenance-free and high durability, incorporates a safety thermostat
PP UL94-VO single inlet fan wheel
Waved wire NiCr resistor that incorporates a safety thermostat
Push-button activates an electronic timer, with a 45 seconds cycle
Stainless steel air outlet grill.
Surface mounted hand dryer shall be fabricated with one-piece 1/8" thick thermoplastic ABS UL94-5V cover.The back base shall be thermoplastic ABS UL94-5V and with 4 holes for wall mounting.
The dryer shall be activated using the push button that activates an electromechanical timer with a 45 seconds cycle before switching dryer off automatically. The induction motor shall be 1/7 hp, 3,300 r.p.m.(at 60 Hz) and incorporate a temperature limiter which switch off at 266 °F (130°C). The waved wire NiCr heating element should incorporate a thermal limiter, which will switch off by a temperature of 176 °F (80°C.)
The PP UL94-V0 fan should have a single inlet and the fan scroll shall be made of thermoplastic ABS UL94-5V. Dryer shall deliver 139 CFM of air at 123.8 °F (51 °C) and 3,872 LFM velocity during user controlled drying cycle.
The dryer shall have a total power of 1,300 Watts with a consumption of 11A. Noise level should be 60 dB. Overall dimensions shall be 9-7/8"W x 11-3/4"H x 5-1/4"D.