Saniflow Speedflow High Volume Automatic Hand Dryer

Roll Over To View Alternate Images

Saniflow Speedflow High Volume Automatic Hand Dryer

SKU: HDM-SF-M06A
MSRP: $500
Our Price: $350.00

Product Overview
Components & Materials
Technical Specifics
Specifications

The New Santiflow Speedflow high output Series Warm air hand dryer. The high volume Speedflow hand dryer has the most COMPETITIVE PRICE with the fastest drying time of just 10 -15 seconds.

Warm air hand dryer with adjustable high speed motor & high RPM.

Surface mounted and conforms to ADAAG projection.

Universal voltage

Maximum robustness and vandal-proof.

Suitable for very high traffic facilities.

10 Year Warranty

Normally goes along with a soap dispenser.

PRODUCT CUT SHEET
Click Here For HDM-SF-M06A Cut Sheet

Steel one-piece cover white epoxy finish, 1/16” thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Speedflow® wrench.

Aluminium base, with 4 Ø 5/16” holes for wall mounting. It includes silent-blocks to damp mechanical vibrations.

Fire resistant plastic UL 94-V0 fan scroll

High speed motor. Universal brush motor, 3.800-8.200 rpm, A class. RPM may be adjusted manually by means of a potentiometer. The motor includes a safety thermal cut-off.

Aluminium centrifugal double asymmetrical inlet fan wheel.

Waved wire NiCr heating element mounted on a mica frame that incorporates a self-resetable thermal cut-off at 302 ºF which disconnect the whole appliance.

Automatic disconnection system after 60 seconds of continuous use.

Fully adjustable (2” – 8”) IR electronic detection sensor by means of a potentiometer.

Sensors come with a polycarbonate viewing window.

Voltage 100-120 V, 208 V, 220-240 V

Total power 1.150 W

Frequency 50/60 Hz Motor power 1/3 HP

Electrical isolation Grounding required

RPM 3.800 - 8.200

Dimensions 11-1/2" x 10-1/2" x 4"

Consumption 9.5 A (120 V)

Weight 7,9 Lbs.

Heating element power 900 W

Effective airflow 36-58 CFM

Nominal airflow 43-70 CFM

Air temperature (at 4" distance 70 °F)

Drying time 10-15 sec

Air velocity 4.920- 9.840 LFM

Noise level (at 79") 64-74 dB

Protection level IP23

Surface mounted and ADA compliant vandal resistant hand dryer shall be manufactured with one-piece high quality 1/16" thick stainless steel cover, satin finish and fixed to the base by means of 2 vandal-proof lock screws and lock with special Speedflow® wrench. The dryer should be an universal voltage unit. The back base shall be aluminium and with 4 holes x 5/16" for wall mounting, including silent-blocks to damp mechanical vibrations.

The dryer shall be activated through an infrared electronic sensor and shall automatically turn off two second after hands are removed. Sensor shall have a polycarbonate viewing window and the detection distance can be regulated from 2" to 8". High speed universal brush motor should be 1/3 HP, 3.800-8200 rpm, A class.

The RPM could be adjusted manually by means of a potentiometer. The motor includes a safety thermal cut-off. The Waved wire NiCr heating element should incorporate a self-resetable thermal cut-off which will disconnect at 302 °F. The hand dryer should have an aluminium asymmetrical double inlet fan wheel, and the fan scroll shall be made of a fire resistant plastic UL 94-V0. Airflow could be adjusted from 43 to 70 CFM with an air temperature from 103 to 111 °F and with and air velocity from 4.920 to 9.840 LFM during user controlled drying cycle. The dryer shall have a total power of 1.150 watts with a consumption of 9.5 A (at 120 V). Noise level should be 64-74 dB at 79" distances. Protection level against water splashes should be rating IP23.

Overall dimensions shall be 11-1/2" x 10-1/2" x 4". Unit shall VDE approved and CE marked and comply with electrical safety directives 73/23/CEE& 93/68/CEE and electro-magnetic compatibility directives 89/336/CEE & 92/31/CEE and with ADA projection requirements.