Saniflow Steel Paper Towel Dispenser

Roll Over To View Alternate Images

Customer Reviews Average Customer Review: Not yet rated Write an online review and share your thoughts with others.

There are no reviews

Surface Mouted Steel Paper Towel Dispenser by Saniflow

Paper towel dispenser, surface mounted, steel white epoxy coated

Manual dispenser Robust and vandal-resistant

Suitable for high traffic facilities

Model suitable for public use

It generally goes along with a soap dispenser and paper waste receptacle steel white epoxy, complemented by a warm air hand dryer

Steel white epoxy coated or Stainless Steel perfectly welded body, 22-gauge (0.8 mm) It is mounted on the wall by means of 4 wood screws with their corresponding 3/16" (5 mm) wall plugs. The support of the screws in the back of the appliance are acting as an anti-moisture support, as well as allowing an easy adjustment to the wall. The slots in the inside of the body avoid the screws damaging the paper towels.The opening presents edged borders in order to avoid tearing of
paper towels.
• Steel white epoxy coated seamless one-piece lid, 22-gauge (0.8
mm). Fixed to the body by means of 2 rivets. It includes a lock with standard saniflow ® key, that allows swinging down of lid for replenishment. A frontal window indicates refill time.

Surface mounted paper towel dispenser, shall be made of steel white epoxy coated. Unit shall dispenser either 400 C-fold or 600 multifold towels. The body shall be made of steel white epoxy coated, perfectly welded,22-gauge (0.8 mm), fully sealed. The support of the screws should act as an anti-moisture support, as well as slots to avoid the screws damaging the paper towels and permit the easy adjustment to the wall. It should be suitable to be mounted on the wall by means of 4 wood screws with their corresponding 3/16" (5 mm) wall plugs. The opening should present edged borders in order to avoid tearing of paper towels. The lid should be made of steel white epoxy coated one-piece seamless, 22-gauge (0.8 mm) and fixed to the body by means of 2 rivets. It includes a lock with standard saniflow ® key, that allows swinging down of lid for replenishment. The appliance should have a frontal window to indicate refill time. Overall dimensions shall be 10-7/8"W x 13"H x 5-1/4"D.