Saniflow Designer Stainless Steel Soap Dispenser

Roll Over To View Alternate Images

Liquid soap dispenser, wall mounted

Push-button operated

Robust and vandal-resistant.

Suitable for high traffic facilities

Model suitable for public use

It normally goes along with a warm air hand dryer

.

Stainless steel AISI 304 body, top filling lid and push-button, 22-gauge (0.8 mm),
white epoxy coated.

Wall mounted soap dispenser, robust and vandal-resistant with a body, top-filling lid and push-button made of stainless steel AISI 304, 22-gauge (0.8 mm), white epoxy coated. It shall be mounted on the wall by means of 4 wood screws with their corresponding 3/16" (5 mm) wall plugs; the lower ones attach the dispenser, while the upper ones fix it to the wall. The dispenser shall include an anti-dripping and anti-corrosion valve, which is based on a polyamide piston with 2 elastomeric toroidal gaskets, silicone blocking pivot and stainless steel ball to ensure tightness

The thermoplastic container shall be 1/8" (3 mm) thick and the access to its interior shall be using a standard saniflow ® key supplied. The dispenser shall be provided with stainless steel AISI 302 springs and housing with 1 viewing slot. The soap dispenser shall be suitable for commercially marketed all purpose liquid and lotion hand soaps and synthetic detergents except for E4-rated antibacterial soaps (active ingredients PCMX or Triclosan), iodine-based surgical soaps, or alcohol-based antiseptic solutions. .