Bobrick ConturaSeries Recessed Waste Receptacle 11.2 Gal

Customer Reviews Average Customer Review: Not yet rated Write an online review and share your thoughts with others.

There are no reviews

Bobrick ConturaSeries Recessed Waste Receptacle 11.2 Gal

Satin-finish stainless steel.

Removable front panel for easy cleaning.

Capacity: 11.2-gal. (42.2-L). Patented. LinerMate Bag Holder removable for servicing.

Installation: .

Recessed waste receptacle shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satinfinish. Front of waste receptacle shall have same degree of arc and match other Bobrick ConturaSeries® accessories in the washroom. Radius on corners and edges of flange and waste receptacle shall complement other Bobrick ConturaSeries® washroom accessories. Flange shall be drawn, one-piece, seamless construction. Waste receptacle shall have a formed, onepiece, seamless, removable front panel with top edge hemmed. LinerMate™ bag holder shall have a molded plastic bag holder sleeve with a 20-gauge (91mm) stainless steel, U-shaped support strap; riveted construction. Bag holder shall have an arc at front and same shape as inside of waste receptacle area. Capacity of waste receptacle shall be 12.8-gal. (48.3-L). Manufacturer’s service and parts manual shall be provided to the building owner/manager upon request.

Provide framed rough wall opening 15-7/8" wide x 26-1/4" high (405 x 665mm). Minimum recessed depth required to finish face of wall is 4" (102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) screws (not furnished).