Frameless Stainless Steel Mirror

Customer Reviews Average Customer Review: Not yet rated Write an online review and share your thoughts with others.

There are no reviews

Fabricated of 20 gauge type 304 stainless steel polished to a #8 minor finish with a 1⁄4" (6 mm) return. Provided with 1⁄4" (6 mm) thick concealed tempered masonite backing and 4 mounting holes. Installer shall provide mounting screws to suit individual field conditions. See chart for standard sizes.

Installation: Surface mount unit to wall using hardware supplied by installer through four [4] or six [6] mounting holes provided. For compliance with ADA Accessibility Guidelines install unit with bottom edge of reflecting surface no higher than 40′′ (1016mm) maximum above finished floor.

Frameless Stainless Steel Mirror with Masonite Back shall be fabricated of alloy 18-8 stainless steel, type 304, 20 gauge with No 8 mirror finish. Backing shall be 1/4′′ (6mm) thick tempered waterproof Masonite. Unit shall have 5/16′′ (8mm) returns to wall all around. Unit shall have four (4) 7/32′′ (5.5mm) dia. mounting holes for sizes up through 24" x 30"; sizes 24" x 36" and up shall have six (6) mounting holes.