*MARKER* 0
Trained Professionals Standing By...
1-888-953-3948

Customer Login | New User

HAND DRYERS BY PRICE
$85 - $160
$160 - $360
$360 - $540
$540 - $1599
HAND DRYERS BY DRY TIME
8-15 Seconds
25-40 Seconds
45-60 Seconds
HAND DRYERS BY BRAND
American Dryer Hand Dryers
American Specialties Hand Dryers
Dyson Hand Dryers
Excel Hand Dryers
Mitsubishi Hand Dryers
Saniflow Hand Dryers
World Hand Dryers
FastDry Hand Dryers
DISPENSERS
Hand Sanitizer Dispensers
Soap Dispensers
Paper Towel Dispensers
Toilet Paper Dispensers
Air Care Dispensers
Gojo & Purell Refills

Recessed Sanitary Napkin/Tampon Vendor/ Disposal

Home > Restroom Accessories
Recessed Sanitary Napkin/Tampon Vendor/ Disposal

Recessed Sanitary Napkin/Tampon Vendor/ Disposal

Not yet rated
SKU: HDM-ASI-04684-TM
MSRP: $928.00
Our Price: $520.00

Qty:  

Select Operation:


View Previous View Next


Customer Reviews
Average Customer Review: Not yet rated
Write an online review and share your thoughts with others.

There are no reviews

Ideal for one toilet washrooms. Has 2 dispensing mechanisms and removable disposal with self-closing door which can be emptied without opening dispenser unit. Dispenses 15 napkins, 23 tampons.





Sanitary Napkin / Tampon Vendor / Disposal shall dispense 15 napkins and 23 tampons of specified sizes and shall have a waste capacity of 1.9 gal (7.2 liters). Unit shall be fabricated of alloy 18-8 stainless steel, type 304, 18 gauge; all exposed surfaces shall have No 4 satin finish and be protected during shipment by PVC film easily removable after installation. Cabinet door shall be attached to frame with a full length 3/16"dia. (5mm) stainless steel multi-staked piano hinge and shall be held closed with three (3) tumbler locks keyed alike to other ASI washroom equipment. Internal coin-box shall be keyed differently than door locks. Waste disposal door shall be attached to cabinet with a stainless steel spring hinge and have the international waste symbol on face. Waste container shall be fabricated of stainless steel same as above, 22 gauge. Dispensing mechanisms shall be fastener mounted internally to provide ability to change mechanisms for coinage denomination. Structural assembly of body and door components shall be of welded construction and have no exposed fasteners or welded seams. Weights for each feed track shall be supplied.

Installation
Unit is mounted in wall recess using No 10 self-tapping screws (by others). Note that coin slot is 22-15/16" (583mm) above bottom edge of rough wall opening.

Rough Wall Opening required is...... 16"W x 42"H x 4′′D minimum (406mm x 1067mm x 102mm).