SURFACE MOUNTED SINGLE ROLL TOILET TISSUE HOLDER

Surface Mounted Single Roll Toilet Tissue Holder with controlled-delivery spindle shall hold and dispense all standard core roll tissue, up to 6" (152mm) in diameter and be fabricated of die cast aluminum with a satin matte silver-gray finish. The “no waste” rocking action spindle shall be fabricated of impact resistant, ABS thermoplastic and be theft resistant with a concealed release mechanism. Spindle shall rotate 1/2 revolution for each operation and return to its original position. Roll core shall not be removable until tissue is exhausted.

Opperations: Spindle revolves 1/2 revolution for each operation and then returns to its original position. Roll core prevents access to release pin and cannot be removed from spindle until exhausted. Unit is replenished by releasing a concealed pin which in turn releases a spring lock mechanism on spindle.

Installation: Unit is surface mounted on wall or partition using self tapping screws (by others). For compliance with ADA Accessibility Guidelines, unit should be installed so that tissue roll centerline is between 44" (1118mm) maximum above finished floor (AFF) and 19" (483mm) minimum AFF.