Dyson Airblade V AB12 Sprayed Nickel Hand Dryers - 3 Pieces

Dyson Airblade V AB12 Sprayed Nickel Hand Dryers - 3 Pieces

    Price:

    $2,397.00

    Code: AB12-3

    SKU: 885609001463

    Weight: 12.00 pounds


    Dyson Airblade V AB12 Sprayed Nickel Hand Dryers - 3 Pieces


    Product range
    AB12 Sprayed Nickel
    Part number/SKU
    Low Voltage: 301829-01

    TECHNICAL SPECIFICATION

    Electrical
    Input voltage: Low Voltage = 110-127 V,
    Frequency: Low Voltage = 50 or 60 Hz, subject to voltage
    (85-115 V at 50 Hz; 85-130 V at 60 Hz);
    Rated power: 1400 W
    Motor type: Dyson digital motor – V4 brushless DC Motor
    Motor switching rate: 6,100 per second
    Motor speed: 92,000 rpm
    Amp: Recommended dedicated 15 amp circuit,
    Low voltage = 11.7 amps at 120V,
    Operating temperature range: 32°– 104°F
    Heater type: None
    Standby power consumption: Less than 0.5 W
    Construction
    Casing construction: Polycarbonate ABS casing
    Antimicrobial coating type: AB12 (Sprayed Nickel) Antimicrobial additive
    in paint.
    Color finish: AB12 Sprayed Nickel molded plastic
    Back plate/mounting bracket construction: ABS/PBT Plastic
    Exterior screw type: Anti-tamper M4 Pin-Hex
    Water ingress protection to IP24

    Filter
    Double-life HEPA filter (glass fiber and fleece prelayer)
    Bacteria removal 99.97% at 0.3 microns

    Operation
    Touch-free proximity capacitive sensor.
    Hand dry time measurement: 12 seconds*
    Operation lock-out period: 30 seconds
    Airspeed at apertures: 420 mph
    Maximum Altitude: 2,000m/6,561 ft.
    Operating airflow: Up to 7.39 gal/sec and up to 59.3 CFM
    Rated operating noise power: 85 db(A)

    Logistics
    Net weight: 6.17 lbs.
    Packaged weight: 8.81 lbs.
    Packaged dimensions: (H) 53 /4" × (W) 177/8" × (D) 103 /4"
    Unit barcodes:
    Sprayed Nickel – Low Voltage: 885609001463


    Standard warranty
    5 year parts and 5 year limited labor warranty

    Accreditations
    Carbon Trust
    NSF International
    ADA compliant
    Contributes to LEED certification

    *Dry time measured using Dyson test method 769 based on
    NSF P335 using a measurement of 0.1g residual moisture.


    FLOOR
    Recommended installation heights from floor
    Male X 521/8" Y 513/16" Z 365/8"
    Female X 503/4" Y 4913/16" Z 351/4"
    Child or disabled X 425/16" Y 413/8" Z 2613/16"
    Child 5-8 X 371/2" Y 367/16" Z 22"
    Child 8-11 X 417/16" Y 401/2" Z 2515/16"

    Machine dimensions
    Height 151/2" Width 9 7/32" Depth 4"

    Minimum clearance
    811/16" in clearance either side and 13/16" in above machine.
    Cable entry point from floor
    Male 427/8"
    Female 411/2"
    Child or disabled 332/16"
    Child 5-8 281/4"
    Child 8-11 323/16"



    Dyson Airlblade V AB12-3 Sprayed Nickel Hand Dryer





    close